- 1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
- 2-port SFP, supporting 100/1000/2500BASE-X transceiver type auto detection
Fiber Port Redundancy
- Automatically detects link status and redundancy on dual ports with the same connector type.
- Only primary port is active at a time, while the backup port is blocked.
- When primary port link failure occurs, the traffic will swap to backup port automatically.
- Once the primary port status is back to linkup, the traffic will swap from backup port to primary port.
Layer 2 Features
- Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
- High-performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- 9K jumbo frame size support
- Integrated address look-up engine, supporting 4K absolute MAC addresses
- Automatic address learning and address aging
Industrial Case and Installation
- Slim IP30 metal case
- DIN-rail, wall-mount or side wall-mount design for redundant power design
- Redundant Power Design
- 12 to 48V DC, redundant power with reverse polarity protection
- AC 24V power adapter acceptable
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature