IGS-620TF

Industrial 4-Port 10/100/1000BASE-T + 2-Port 100/1G/2.5GBASE-X SFP Ethernet Switch

Physical Port

  • Four 10/100/1000BASE-T RJ45 ports with auto MDI / MDI-X function
  • Two SFP interfaces, supporting 100/1000/2500BASE-X transceiver type auto detection 

Fiber Port Redundancy

  • Automatically detects link status and redundancy on dual ports with the same connector type.
  • Only primary port is active at a time, while the backup port is blocked.
  • When primary port link failure occurs, the traffic will swap to backup port automatically.
  • Once the primary-port status is back to link up, the traffic will swap from backup port to primary port. 

Layer 2 Features

  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 9K Jumbo Frame size support
  • Backplane (Switching Fabric): 18Gbps
  • Integrated address look-up engine, supporting 4K absolute MAC addresses
  • Automatic address learning and address aging
  • IEEE 802.1Q VLAN transparency
  • CSMA/CD Protocol

Industrial Case and Installation

  • Slim IP30 metal case protection
  • DIN-rail, wall-mount or side wall-mount design for redundant power design
    • 12 to 48V DC, redundant power with reverse polarity protection
    • AC 24V power adapter acceptable
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
Dimension